Search Results

Search results for the tamko edge

TAMKO Specifications 1500 Series Awaplan SA FR Specs

https://cdntamkowebsiteprod.azureedge.net/root/docs/default-source/specs-techs/tamko_specifications_1500_series_awaplan_sa_fr_specs.pdf?sfvrsn=ef0856a0_0

TAMKO Specifications 1500 Series Awaplan SA FR Specs,  317 JP47787 04/12 INSULATED DECK Material Requirements TAMKO AWA NAILBASE 1ply TAMKO AWA P, linear ft., fastening of the AWA P L A N S A FR is required. Deck: The deck should conform to TAMKO, to the manufacturer’s specicationinthethicknessrequired. The insulation s h o u l d c o n f o r m t o TAMKO, than 8 in. Stagger fasteners on 16 in. centers along 2 lines located 13 in. from each edge, -joint. Cut on a diagonal angle 5-1/2 in. long from the end of the roll to the outside edge. The width

Homeowner Guide to Reading Your Roof – What’s Normal and What’s Not

https://www.tamko.com/about/media-center/news-releases/post/2019/07/19/homeowner-guide-to-reading-your-roof-what-s-normal-and-what-s-not

and shrink with time, which may result in a slight curling of the shingle edge. Minor cracks may, trainer for shingle manufacturer TAMKO Building Products. “The intense heat from the sun can deplete some

TAMKO Specifications 1502 Awaplan SA FR Spec

https://cdntamkowebsiteprod.azureedge.net/root/docs/default-source/specs-techs/tamko_specifications_1502_awaplan_sa_fr_spec.pdf?sfvrsn=8b0856a0_0

TAMKO Specifications 1502 Awaplan SA FR Spec,  319 JP47787 04/12 Page 1 of 2 INSULATED DECK Material Requirements TAMKO AWA NAILBASE 1 ply TAMKO AWA B A S E S A 1ply TAMKO AWA P L A N S A FR (Granule Surfaced) 1ply S c rews and Plates, . Deck: The deck should conform to TAMKO general requirements. Insulation: The insulation should, r e d . The insulation should conform to TAMKO requirements. Expanded Polystyrene, Extruded, on a diagonal angle 5-1/2 in. long from the end of the roll to the outside edge. The width of the cut

TAMKO Specifications 1600 Series AwaStar SA FR Specs

https://cdntamkowebsiteprod.azureedge.net/root/docs/default-source/specs-techs/tamko_specifications_1600_series_awastar_sa_fr_specs.pdf?sfvrsn=4d0956a0_0

TAMKO Specifications 1600 Series AwaStar SA FR Specs,  329 JP47787 04/12 INSULATED DECK Material Requirements TAMKO AWA NAILBASE 1ply TAMKO AWA S, ., fastening of the AWA S TAR SA FR is required. D e c k : The deck should conform to TAMKO, to TAMKO requirements. Expanded polystyrene, extruded polystyrene, and cellular foam glass insulations, edge of the base sheet. AWA S TAR SA FR: Starting at the low point of the roof, install 1 layer, -joint. Cut on a diagonal angle 5-1/2 in. long from the end of the roll to the outside edge. The width

Titan XT Shingles: High-Performance Under Extreme Conditions

https://www.tamko.com/blog/contractor-news/2024/06/10/titan-xt-shingles-high-performance-under-extreme-conditions

elements? On Matinicus Island – 22 miles off the coast of Maine, TAMKO's Titan XT, the first major windstorm, holding tightly and proving why they were right choice. *TAMKO’s, up to 160 mph. Please consult TAMKO’s Limited Warranty and Application Instructions for all, roofing solutions like TAMKO’s Titan XT® in such demanding conditions. This unique environment, in harsh climates, Titan XT® was identified as the best shingle for this install, completed by TAMKO

TAMKO Complete System Sell Sheet

https://cdntamkowebsiteprod.azureedge.net/root/docs/default-source/brochures-literature/tamko-complete-system-sell-sheet_b7e7d7ae-abdb-45f6-b679-96bd78d14206.pdf?sfvrsn=716c22a0_6

TAMKO Complete System Sell Sheet, with TA M KO® Starter Course Shingles on the eave and/o r rake edge prior to shingle installation, ™ Plus * Please consult TAMKO’s Limited Warranty and Application Instructions for any requirements or limitations. Insist on TAMKO® products for the full TAMKO Complete® Roof System. TAMKO products, to a TAMKO WxtShield Enhanced System Warranty® at tamko.com/enhancedwarranties . PROTECT PERFORM, for your roofng job from TAMKO’s inclusive line of asphalt shingles. Whatever your job calls

TAMKO Low Slope UL Evaluation Report (ER3225-01)

https://cdntamkowebsiteprod.azureedge.net/root/docs/default-source/certifications/tamko-low-slope-ul-evaluation-report-(er3225-01)_566788ce-a48a-4495-868c-279ef3ef5e57.pdf?sfvrsn=595158a0_6

TAMKO Low Slope UL Evaluation Report (ER3225-01), : TAMKO Building Products, Inc. 220 West 4 th Street Joplin, MO 64802 www.tamko.com 1. SUBJECT, -PRO 856 Premium SBS adhesive used to bond TAMKO membranes to the insulation or roofing substrate shall be as noted in the Tables of this Report. Page 5 of 19 6. INSTALLATION TAMKO roofing felts, code. 7. FIRE CASSIFICATION 7.1 New Construction: Roof assemblies utilizing TAMKO roof coverings, having jurisdiction is required. TAMKO roof coverings may be installed over existing Classified Class

TAMKO Waterproofing Brochure

https://cdntamkowebsiteprod.azureedge.net/root/docs/default-source/brochures-literature/tamko-waterproofing-brochure_92a9b763-f25a-4ad5-99ff-334b16614318.pdf?sfvrsn=90b056a0_22

TAMKO Waterproofing Brochure, PRODUCTS WILL LAST. THAT’S WHY TAMKO PROVIDES A LIMITED WA R R A N T Y FOR MANY PRODUCTS, THAT INCLUDES, 1-800-641-4691. The portfolio of TAMKO ® products helps complete your balcony and breezeway system by aiding, . TW-60 provides an optimal solution when paired with TAMKO’s fashing, mastic and primers. Contractors, for multiple uses, including fnishing the edge of seams, overlaps, patches and terminations of properly sealed TAMKO® waterproofng membranes. TWM-1 Mastic is a high-quality trowel-grade SBS-modifed