×
  • Underlayments
  • Self-Adhering Underlayments
  • Starter/Hip & Ridge
  • Ventilation
  • Low-Slope/Flat Roofs

Underlayments

Synthetic Underlayments

Synthetic Guard™ Plus Underlayment

A non-woven synthetic underlayment with a grey coated polypropylene spun bond fabric surface, a polypropylene 10 × 5 scrim and a grey backside coating.
Product Details
Product Features  
  • Light grey polypropylene surface
  • Non-woven surface
  • Polypropylene 10 × 5 scrim
  • Lay lines and cap-nail locations printed on the underlayment. Also includes additional high wind and Florida cap-nail locations.
  • 25-year Limited Warranty

Application Instructions
Synthetic Guard Plus Application Instructions
Data Sheets
Synthetic Guard Plus Data Sheet
Safety Data Sheet
Synthetic Guard & Synthetic Guard Plus SDS
Technical Product Information
Product Sheet
Custom Logo Imprint for TAMKO Synthetic Underlayments
Brochure
TAMKO Underlayment Products Brochure

UNDERLAYMENTS BEGIN TO AGE AS SOON AS THEY ARE EXPOSED TO NATURE, AND BUILDINGS EXPERIENCE AGING FACTORS DIFFERENTLY. BECAUSE IT IS DIFFICULT TO PREDICT HOW LONG UNDERLAYMENTS WILL LAST, TAMKO OFFERS A LIMITED WARRANTY ON SYNTHETIC GUARD PLUS UNDERLAYMENT THAT INCLUDES A BINDING ARBITRATION CLAUSE AND OTHER TERMS AND CONDITIONS WHICH ARE INCORPORATED HEREIN BY REFERENCE. YOU MAY OBTAIN A COPY OF THE LIMITED WARRANTY AT TAMKO.COM OR BY CALLING 1-800-641-4691.

IMPORTANT SAFETY INFORMATION: Use personal fall protection devices when working on a roof. Personal fall protection devices, safety glasses and hearing protection must always be used when applying Synthetic Guard Plus underlayment. Moisture, frost or debris will decrease the traction when walking on Synthetic Guard Plus underlayment. Applicator safety is of utmost importance.

Synthetic Guard™ Underlayment

A non-woven synthetic underlayment with a black coated polypropylene spun bond fabric surface, a polypropylene 5 × 5 scrim and a black backside coating.
Product Details

Product Features

  • Non-woven surface
  • Polypropylene 5 × 5 scrim
  • Lay lines and cap-nail locations printed on the underlayment. Also includes additional high wind and Florida cap-nail locations.
  • 10-year Limited Warranty

Safety Data Sheet
Synthetic Guard & Synthetic Guard Plus SDS
Technical Product Information
Product Sheet
Custom Logo Imprint for TAMKO Synthetic Underlayments
 Brochure
TAMKO Underlayment Products Brochure

UNDERLAYMENTS BEGIN TO AGE AS SOON AS THEY ARE EXPOSED TO NATURE, AND BUILDINGS EXPERIENCE AGING FACTORS DIFFERENTLY. BECAUSE IT IS DIFFICULT TO PREDICT HOW LONG UNDERLAYMENTS WILL LAST, TAMKO OFFERS A LIMITED WARRANTY ON SYNTHETIC GUARD UNDERLAYMENT THAT INCLUDES A BINDING ARBITRATION CLAUSE AND OTHER TERMS AND CONDITIONS WHICH ARE INCORPORATED HEREIN BY REFERENCE. YOU MAY OBTAIN A COPY OF THE LIMITED WARRANTY AT TAMKO.COM OR BY CALLING 1-800-641-4691.

IMPORTANT SAFETY INFORMATION: Use personal fall protection devices when working on a roof. Personal fall protection devices, safety glasses and hearing protection must always be used when applying Synthetic Guard underlayment. Moisture, frost or debris will decrease the traction when walking on Synthetic Guard underlayment. Applicator safety is of utmost importance.

No. 30 Underlayments

No. 30 UL

Features a TAMKO organic felt (non-perforated) that is saturated with asphalt. Accepted for use as an underlayment felt to be applied over the deck prior to the installation of TAMKO asphalt shingles.
Product Details
Product Features
  • 72' × 36", 216 square feet per roll*
  • Laying lines 2", 12", 17"
*Subject to manufacturing variation

Data Sheets
No. 30 UL Asphalt Saturated Organic Felt Data Sheet (Frederick, Grove Springs, Joplin)
No. 30 UL Asphalt Saturated Organic Felt Data Sheet (Tuscaloosa)
Safety Data Sheet
Saturated Felt SDS
Technical Product Information
  • UL Listed for Built-Up, Type 30 Label in accordance with UL 55A
  • Tested by a third party laboratory for compliance with ASTM D226, Type II
  • Florida Building Code Approved
Brochure
TAMKO Underlayment Products Brochure
Notice: This product is sold "AS IS" and without warranty of any kind, express, implied or statutory, including but not limited to the implied warranties of merchantability and fitness for a particular purpose.

IMPORTANT SAFETY INFORMATION: Use personal fall protection devices when working on a roof. Personal fall protection devices, safety glasses and hearing protection must always be used when applying this product. Moisture, frost or debris will decrease the traction when walking on this product. Applicator safety is of utmost importance.

Other Underlayments

ASTM Tile Underlayment

Accepted for use as an underlayment felt to be applied over the deck prior to the installation of concrete tile. This underlayment contains a TAMKO organic felt saturated with asphalt, then coated on both sides with a weathering-grade asphalt and surfaced with opaque granules.
Product Details
Product Features
  • 36' × 36" coverage (1 sales square)*
  • 108 square feet per roll*
  • 25 rolls per pallet
*Subject to manufacturing variation

Data Sheet
ASTM Tile Underlayment Data Sheet (Green Cove)
Safety Data Sheet
ASTM Tile Underlayment SDS
Technical Product Information
  • UL Listed for UL Prepared Roofing Accessory
  • Tested by a third party laboratory for compliance with ASTM D6380 Class M, Type II
  • Florida Building Code Approved
Brochure
TAMKO Underlayment Products Brochure
Notice: This product is sold "AS IS" and without warranty of any kind, express, implied or statutory, including but not limited to the implied warranties of merchantability and fitness for a particular purpose.

IMPORTANT SAFETY INFORMATION: Use personal fall protection devices when working on a roof. Personal fall protection devices, safety glasses and hearing protection must always be used when applying this product. Moisture, frost or debris will decrease the traction when walking on this product. Applicator safety is of utmost importance.

Self-Adhering Underlayments

Moisture Guard®

For use as a self-adhering underlayment prior to installation of the final roof system and as a secondary layer in areas susceptible to windblown rain and ice damming. Moisture Guard is used on roof decks, around chimneys, dormers, vents and skylights, and along rake and eave edges, valleys and ridges. Moisture Guard is used under most types of roofing, including tile, wood shake, asphalt, slate or composite shingles. It is not recommended for use under metal roofing.*
Product Details
Product Features
Application Instructions
Moisture Guard Application Instructions
Data Sheets
Moisture Guard Data Sheet

Safety Data Sheet
Moisture Guard SDS
Certifications
UL Classified as a Prepared Roofing Accessory
Brochure

TAMKO Underlayment Products Brochure
Limited Warranty and Arbitration Agreement
TAMKO Asphalt Underlayments Limited Warranty and Arbitration Agreement

UNDERLAYMENTS BEGIN TO AGE AS SOON AS THEY ARE EXPOSED TO NATURE. BUILDINGS EXPERIENCE AGING FACTORS DIFFERENTLY, SO IT IS DIFFICULT TO PREDICT HOW LONG UNDERLAYMENTS WILL LAST. THAT'S WHY TAMKO PROVIDES A LIMITED WARRANTY ON MOISTURE GUARD THAT INCLUDES A BINDING ARBITRATION CLAUSE AND OTHER TERMS AND CONDITIONS WHICH ARE INCORPORATED HEREIN BY REFERENCE. YOU MAY OBTAIN A COPY OF THE LIMITED WARRANTY AT TAMKO.COM OR BY CALLING 1-800-641-4691.


IMPORTANT SAFETY INFORMATION: Use personal fall protection devices when working on a roof. Personal fall protection devices, safety glasses and hearing protection must always be used when applying Moisture Guard underlayment. Moisture, frost or debris will decrease the traction when walking on Moisture Guard underlayment. Applicator safety is of utmost importance.

TW Underlayment

A self-adhering rubberized asphalt sheet membrane with a polymer film on the surface and a removable treated release film on the adhesive side. Surface is textured for skid resistance and can be left exposed for up to 120 days.
Product Details
Application Instructions
TW Underlayment Application Instructions
Data Sheets
TW Underlayment Data Sheet
Safety Data Sheet
 TW Underlayment SDS
Technical Product Information
Florida Building Code Approval
Brochures
Waterproofing Brochure
Limited Warranty and Arbitration Agreement
TAMKO Asphalt Underlayments Limited Warranty and Arbitration Agreement

WATERPROOFING PRODUCTS BEGIN TO AGE AS SOON AS THEY ARE EXPOSED TO NATURE, AND BUILDINGS EXPERIENCE AGING FACTORS DIFFERENTLY. BECAUSE IT IS DIFFICULT TO PREDICT HOW LONG WATERPROOFING PRODUCTS WILL LAST, TAMKO OFFERS A LIMITED WARRANTY THAT INCLUDES A BINDING ARBITRATION CLAUSE AND OTHER TERMS AND CONDITIONS WHICH ARE INCORPORATED HEREIN BY REFERENCE. YOU MAY OBTAIN A COPY OF THE LIMITED WARRANTY AT TAMKO.COM OR BY CALLING 1-800-641-4691.

IMPORTANT SAFETY INFORMATION: Use personal fall protection devices when working on a roof. Personal fall protection devices, safety glasses and hearing protection must always be used when applying this product. Moisture, frost or debris will decrease the traction when walking on this product. Applicator safety is of utmost importance.

TW Metal and Tile Underlayment

A fiberglass-reinforced self-adhering rubberized asphalt sheet membrane with a polymer film on the surface. Features a removable treated release film on the adhesive side for convenient installation and handling. TW Metal & Tile Underlayment can be left exposed for up to 120 days and is used under metal roofs, mechanically fastened tile, slate, wood shakes, asphalt and composite shingles.

Product Details

WATERPROOFING PRODUCTS BEGIN TO AGE AS SOON AS THEY ARE EXPOSED TO NATURE, AND BUILDINGS EXPERIENCE AGING FACTORS DIFFERENTLY. BECAUSE IT IS DIFFICULT TO PREDICT HOW LONG WATERPROOFING PRODUCTS WILL LAST, TAMKO OFFERS A LIMITED WARRANTY THAT INCLUDES A BINDING ARBITRATION CLAUSE AND OTHER TERMS AND CONDITIONS WHICH ARE INCORPORATED HEREIN BY REFERENCE. YOU MAY OBTAIN A COPY OF THE LIMITED WARRANTY AT TAMKO.COM OR BY CALLING 1-800-641-4691.

IMPORTANT SAFETY INFORMATION: Use personal fall protection devices when working on a roof. Personal fall protection devices, safety glasses and hearing protection must always be used when applying this product. Moisture, frost or debris will decrease the traction when walking on this product. Applicator safety is of utmost importance.

TW Seam Tape

A flexible, self-adhering SBS modified bitumen roof deck seam tape with a polymer film on the surface and a removable treated release film on the adhesive side. For use as a roof deck seam tape to cover all joints and seams. Provides secondary protection against water penetration at deck seams and joints.
Product Details

WATERPROOFING PRODUCTS BEGIN TO AGE AS SOON AS THEY ARE EXPOSED TO NATURE, AND BUILDINGS EXPERIENCE AGING FACTORS DIFFERENTLY. BECAUSE IT IS DIFFICULT TO PREDICT HOW LONG WATERPROOFING PRODUCTS WILL LAST, TAMKO OFFERS A LIMITED WARRANTY THAT INCLUDES A BINDING ARBITRATION CLAUSE AND OTHER TERMS AND CONDITIONS WHICH ARE INCORPORATED HEREIN BY REFERENCE. YOU MAY OBTAIN A COPY OF THE LIMITED WARRANTY AT TAMKO.COM OR BY CALLING 1-800-641-4691.

IMPORTANT SAFETY INFORMATION: Use personal fall protection devices when working on a roof. Personal fall protection devices, safety glasses and hearing protection must always be used when applying this product. Moisture, frost or debris will decrease the traction when walking on this product. Applicator safety is of utmost importance.

Starter/Hip & Ridge

Starter Shingles

Heritage® Vintage® Shingle Starter

Part of a two-course layer that must be applied prior to the application of Heritage Vintage shingles.
Product Details
Product Features
  • Shingle size: 12-1/2" x 36"
  • Shingles per bundle: 20
  • Lineal feet per bundle: 60’

Heritage Vintage Starter Data Sheet
Heritage Vintage 12x12 Hip and Ridge Data Sheet
Safety Data Sheet
TAMKO Shingle Products SDS
Certifications
UL Listed for
Class A Fire Resistance Wind Resistance ASTM D 3462
Tested in Compliance with UL 790/ASTM E 108, Class A
ASTM D 3161, Type 1, Class F (110 mph)
ASTM D 7158 Class H (150 mph) UL 2390/ASTM D 6381 Class H (150 mph)

Additional Certifications
Florida Building Code Approval
Miami-Dade County NOA, 06-0816.07 Expiration Date: 11/23/11
Brochures
Heritage Vintage Brochure

NOTICE: THIS PRODUCT IS SOLD “AS IS” AND WITHOUT WARRANTY OF ANY KIND. ALL WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE EXCLUDED.

WARNING: Use of polyurethane foam insulation applied directly to the underside of a roof deck may cause premature degradation or failure of this asphalt roofing product. Chemical incompatibility, off-gassing after application and excess heat during and after application of polyurethane foams may affect the performance of asphalt and modified asphalt building products and metal fasteners used with those products.

TAMKO® Shingle Starter

A precut universal starter course shingle designed to eliminate the wasted time and material of field cutting 3-tab or roll roofing materials into starter course shingles.
Product Details
Product Features
  • Precut into convenient 7" x 36" strips for quick and easy installation
  • Factory-applied sealant strip
  • Approximately 34 shingles per bundle
  • Covers approximately 102 linear feet per bundle

Application Instructions

Shingle Starter Application Instructions

TAMKO Shingle Products SDS

NOTICE: THIS PRODUCT IS SOLD “AS IS” AND WITHOUT WARRANTY OF ANY KIND. ALL WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE EXCLUDED.

WARNING: Use of polyurethane foam insulation applied directly to the underside of a roof deck may cause premature degradation or failure of this asphalt roofing product. Chemical incompatibility, off-gassing after application and excess heat during and after application of polyurethane foams may affect the performance of asphalt and modified asphalt building products and metal fasteners used with those products.

TAMKO® Perforated Starter

Perforated to allow them to be separated into two starter strips. Made of fiberglass mat coated with asphalt and surfaced with ceramic granules.
Product Details
Product Features
  • Perforated shingles to help reduce labor time to field cut shingles
  • Helps reduces waste
  • Sealant strip to seal first course of shingles
  • Fills in the spaces under the shingle joints
  • Allows the first course of shingles to seal

Application Instructions
TAMKO Perforated Starter Application Instructions

Data Sheets
TAMKO Perforated Starter Data Sheet

SDS
TAMKO Shingle Products SDS

NOTICE: THIS PRODUCT IS SOLD “AS IS” AND WITHOUT WARRANTY OF ANY KIND. ALL WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE EXCLUDED.

WARNING: Use of polyurethane foam insulation applied directly to the underside of a roof deck may cause premature degradation or failure of this asphalt roofing product. Chemical incompatibility, off-gassing after application and excess heat during and after application of polyurethane foams may affect the performance of asphalt and modified asphalt building products and metal fasteners used with those products.

TAMKO® 10 Inch Starter

A precut universal starter course shingle designed to eliminate the wasted time and material of field cutting 3-tab or roll roofing materials into starter course shingles. Comes with a factory-applied sealant to eliminate the need for plastic cement. A starter course shingle to get the job started.
Product Details
Product Features
  • Precut into convenient 10" x 40" strips for quick and easy installation
  • Factory-applied sealant strip
  • Approximately 30 shingles per bundle
  • Covers approximately 100 linear feet per bundle

Application Instructions

10-inch Shingle Starter Application Instructions

Data Sheets
10-Inch Starter Data Sheet
SDS
TAMKO Shingle Products SDS

NOTICE: THIS PRODUCT IS SOLD “AS IS” AND WITHOUT WARRANTY OF ANY KIND. ALL WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE EXCLUDED.

WARNING: Use of polyurethane foam insulation applied directly to the underside of a roof deck may cause premature degradation or failure of this asphalt roofing product. Chemical incompatibility, off-gassing after application and excess heat during and after application of polyurethane foams may affect the performance of asphalt and modified asphalt building products and metal fasteners used with those products.

Hip & Ridge

Heritage® Vintage® 12x12 Hip & Ridge

Forms a cap along various angles of a Heritage® Vintage® roof. Made from a fiberglass mat coated on both sides with weathering-grade asphalt and surfaced with granules.
Product Details
Product Features
  • Helps save time and labor
  • Each shingle is perforated into three pieces for ease during application
  • 10-year Algae Cleaning Limited Warranty that provides for cleaning of discoloration caused by certain algae growth that may occur in areas with high humidity
  • Shingle size 12" x 12"
  • Exposure: 5"
  • Linear feet per bundle (5" exposure): 25'
  • Shingles per bundle: 60
  • Shingles per 100 linear feet: 240
  • Bundles per 100 linear feet: 4
  • Bundles per pallet: 36
 
Certifications

UL Listed for
Class A Fire Resistance Wind Resistance ASTM D 3462
Tested in Compliance with UL 790/ASTM E 108, Class A
ASTM D 3161, Type 1, Class F (110 mph)
ASTM D 7158 Class H (150 mph) UL 2390/ASTM D 6381 Class H (150 mph)
UL Evaluation Report (ER2919-01)
UL Evaluation Report (ER2919-02)
Additional Certifications
Florida Building Code Approval
 Miami-Dade County NOA
Brochures
Heritage Vintage Brochure (Phillipsburg)


 

SHINGLES BEGIN TO AGE AS SOON AS THEY ARE EXPOSED TO NATURE. BUILDINGS EXPERIENCE AGING FACTORS DIFFERENTLY, SO IT IS DIFFICULT TO PREDICT HOW LONG SHINGLES WILL LAST. TAMKO PROVIDES A LIMITED WARRANTY FOR MANY PRODUCTS, THAT INCLUDES A BINDING ARBITRATION CLAUSE AND OTHER TERMS AND CONDITIONS WHICH ARE INCORPORATED HEREIN BY REFERENCE.THIS PRODUCT IS COVERED BY THE TAMKO LIMITED WARRANTY FOR THE TAMKO SHINGLES COVERING THE FIELD OF THE ROOF. YOU MAY OBTAIN A COPY OF THE LIMITED WARRANTY FOR TAMKO SHINGLES COVERING THE FIELD OF THE ROOF AT TAMKO.COM OR BY CALLING 1-800-641-4691.

WARNING: Use of this product in an assembly that includes polyurethane foam insulation (including without limitation an application directly to the underside of a roof deck or within a wall assembly) may cause premature degradation or failure of this product. Chemical incompatibility, off-gassing after application and excess heat during and after application of polyurethane foams may affect the performance of asphalt and modified asphalt building products and metal fasteners used with those products.

Heritage® Designer Ridge

Add the perfect finishing touch and create a distinct look in the neighborhood with higher profile Heritage® Designer Ridge shingles.
Product Details
Product Features
  • Up to 1/2" thicker than standard Heritage® Hip & Ridge, creating a dynamic finish.
  • Constructed with SBS Modified Bitumen Technology.
  • Self-sealing adhesive
  • 8" exposure
  • Available in 10" width*
  • Available in colors that complement TAMKO Heritage®, StormFighter IR®, and Titan XT® shingles*
*Not all colors and sizes may be available in your area. Contact your TAMKO sales representative for complete color and size availability.
Technical Information
  • UL 790 Class A Fire Resistance
  • ASTM D3161, Class F for wind resistance

Application Instructions
Heritage Designer Ridge Application Instructions 
Data Sheet
Heritage Designer Ridge Data Sheet
Safety Data Sheet
Heritage Designer Ridge SDS
Sell Sheet
Heritage Designer Ridge Sell Sheet

 

SHINGLES BEGIN TO AGE AS SOON AS THEY ARE EXPOSED TO NATURE. BUILDINGS EXPERIENCE AGING FACTORS DIFFERENTLY, SO IT IS DIFFICULT TO PREDICT HOW LONG SHINGLES WILL LAST. TAMKO PROVIDES A LIMITED WARRANTY FOR MANY PRODUCTS, THAT INCLUDES A BINDING ARBITRATION CLAUSE AND OTHER TERMS AND CONDITIONS WHICH ARE INCORPORATED HEREIN BY REFERENCE.THIS PRODUCT IS COVERED BY THE TAMKO LIMITED WARRANTY FOR THE TAMKO SHINGLES COVERING THE FIELD OF THE ROOF. YOU MAY OBTAIN A COPY OF THE LIMITED WARRANTY FOR TAMKO SHINGLES COVERING THE FIELD OF THE ROOF AT TAMKO.COM OR BY CALLING 1-800-641-4691.

WARNING: Use of this product in an assembly that includes polyurethane foam insulation (including without limitation an application directly to the underside of a roof deck or within a wall assembly) may cause premature degradation or failure of this product. Chemical incompatibility, off-gassing after application and excess heat during and after application of polyurethane foams may affect the performance of asphalt and modified asphalt building products and metal fasteners used with those products.

TAMKO® 12-1/4" x 12" Hip & Ridge

Provides a finishing touch for roofs. Precut shingles for installation on hips and ridges. Made with the same fiberglass mat and mineral-granule color blends as Heritage® and Proline series shingles to give the same beautiful wood shake look on every inch of the roof. Classified by UL for compliance with UL 2218 Class 3 Impact Resistance.
Product Details
Product Features
  • Classified by UL for compliance with UL 2218 Class 3 Impact Resistance
  • Scored into 12-1/4" x 12" pieces 
  • Factory-applied sealant strip

Application Instructions

12-1/4" x 12" Hip & Ridge Application Instructions

Data Sheets
12-1/4" x 12" Hip & Ridge Data Sheet (Joplin)

Safety Data Sheet
TAMKO Shingle Products SDS

Certifications
UL Listed for
Class A Fire Resistance

UL Classified:
Impact Resistance
Wind Resistance
ASTM D 3462 and ICC-ES Acceptance Criteria AC438

Tested in Compliance with
UL 790/ASTM E 108, Class A
ASTM D 3161, Class F
ASTM D 3462 and ICC-ES Acceptance Criteria AC438
UL 2218 Class 3 Impact Resistance

UL Evaluation Reports:
UL Evaluation Report (ER2919-01)
UL Evaluation Report (ER2919-02)

Additional Certifications
Florida Building Code Approval
Miami-Dade County Product Control Approved

SHINGLES BEGIN TO AGE AS SOON AS THEY ARE EXPOSED TO NATURE. BUILDINGS EXPERIENCE AGING FACTORS DIFFERENTLY, SO IT IS DIFFICULT TO PREDICT HOW LONG SHINGLES WILL LAST. TAMKO PROVIDES A LIMITED WARRANTY FOR MANY PRODUCTS, THAT INCLUDES A BINDING ARBITRATION CLAUSE AND OTHER TERMS AND CONDITIONS WHICH ARE INCORPORATED HEREIN BY REFERENCE.THIS PRODUCT IS COVERED BY THE TAMKO LIMITED WARRANTY FOR THE TAMKO SHINGLES COVERING THE FIELD OF THE ROOF. YOU MAY OBTAIN A COPY OF THE LIMITED WARRANTY FOR TAMKO SHINGLES COVERING THE FIELD OF THE ROOF AT TAMKO.COM OR BY CALLING 1-800-641-4691.

WARNING: Use of this product in an assembly that includes polyurethane foam insulation (including without limitation an application directly to the underside of a roof deck or within a wall assembly) may cause premature degradation or failure of this product. Chemical incompatibility, off-gassing after application and excess heat during and after application of polyurethane foams may affect the performance of asphalt and modified asphalt building products and metal fasteners used with those products.

TAMKO® Proline™ 12-1/4" x 12" Hip & Ridge

Provides the finishing touch along with TAMKO’s StormFighter FLEX shingles for complete roof protection. Classified by UL for compliance with UL 2218 Class 4 Impact Resistance.
Product Details
Product Features
  • Must be used with StormFighter IR shingles
  • Classified by UL for compliance with UL 2218 Class 4 Impact Resistance
  • Polyester mat on the underside of the shingle
  • Scored into 12-1/4" x 12" pieces
  • Factory-applied sealant strip

Application Instructions

12-1/4" x 12" Hip & Ridge Application Instructions

Data Sheets
StormFighter IR Data Sheet 
Proline Hip & Ridge Data Sheet

Safety Data Sheet
TAMKO Shingle Products SDS

Certifications
UL Listed for
Class A Fire Resistance

UL Classified:
Impact Resistance
Wind Resistance
ASTM D3462
ICC-ES Acceptance Criteria AC438

Tested in Compliance with
UL 790/ASTM E 108, Class A
ASTM D3161, Class F
ASTM D7158, Class H
UL 2218 Class 4 Impact Resistance
ASTM D3462
ICC-ES Acceptance Criteria AC438

UL Evaluation Reports:
UL Evaluation Report (ER2919-01)
UL Evaluation Report (ER2919-02)

SHINGLES BEGIN TO AGE AS SOON AS THEY ARE EXPOSED TO NATURE. BUILDINGS EXPERIENCE AGING FACTORS DIFFERENTLY, SO IT IS DIFFICULT TO PREDICT HOW LONG SHINGLES WILL LAST. TAMKO PROVIDES A LIMITED WARRANTY FOR MANY PRODUCTS, THAT INCLUDES A BINDING ARBITRATION CLAUSE AND OTHER TERMS AND CONDITIONS WHICH ARE INCORPORATED HEREIN BY REFERENCE.THIS PRODUCT IS COVERED BY THE TAMKO LIMITED WARRANTY FOR THE TAMKO SHINGLES COVERING THE FIELD OF THE ROOF. YOU MAY OBTAIN A COPY OF THE LIMITED WARRANTY FOR TAMKO SHINGLES COVERING THE FIELD OF THE ROOF AT TAMKO.COM OR BY CALLING 1-800-641-4691.

WARNING: Use of this product in an assembly that includes polyurethane foam insulation (including without limitation an application directly to the underside of a roof deck or within a wall assembly) may cause premature degradation or failure of this product. Chemical incompatibility, off-gassing after application and excess heat during and after application of polyurethane foams may affect the performance of asphalt and modified asphalt building products and metal fasteners used with those products.

Ventilation

CoolRidge® Vent

A self-contained 4-foot sectional shingle-over ridge vent designed for ventilation. Features both an external and an internal “sinewave” shaped baffle designed to help guard against wind-driven rain and slow infiltration. Each section also contains integrated end plugs located every foot to reduce scrap when splicing. 
Product Details
Product Features
  • 18 square inches of net free area (NFA) per linear foot—excellent ventilation
  • Injection-molded polypropylene product
  • External and internal baffles help prevent rain and snow infiltration
  • Available with an internal filter, which increases resistance to weather infiltration
  • Internal supports in nail line provide compression resistance without blocking nails
  • Nails included to add installation convenience
  • Embossed nail line helps ensure proper nail placement
  • Male/female connection between pieces helps prevent leaks at seams
  • Integrated end plugs every foot reduces scrap
  • Easily installed—requires no special tools
  • Up to a 40-year Limited Warranty, depending on the warranty term of the new shingles installed
 
Application Instructions
CoolRidge Application Instructions Data Sheets
CoolRidge Data Sheet
CoolRidge (with filter) Data Sheet Certifications
Florida Building Code Approval Brochures
Ventilation Brochure

VENTILATION PRODUCTS BEGIN TO AGE AS SOON AS THEY ARE EXPOSED TO NATURE. BUILDINGS EXPERIENCE AGING FACTORS DIFFERENTLY, SO IT IS DIFFICULT TO PREDICT HOW LONG VENTILATION PRODUCTS WILL LAST. TAMKO PROVIDES A LIMITED WARRANTY, THAT INCLUDES A BINDING ARBITRATION CLAUSE AND OTHER TERMS AND CONDITIONS WHICH ARE INCORPORATED HEREIN BY REFERENCE. YOU MAY OBTAIN A COPY OF THE LIMITED WARRANTY AT TAMKO.COM OR BY CALLING 1-800-641-4691.

QuickVent®

A continuous ridge vent designed to ventilate attic space when used in conjunction with soffit vents. Can be installed with a nail gun.
Product Details
Product Features
  • Comes with up to a 40-year Limited Warranty from TAMKO®
  • Installs with pneumatic roofing nail gun
  • See-through material for centering over the ridge
  • Innovative design provides effective shingle-over ventilation
  • Classic style ridge vent made from nylon matrix technology
  • 1-3/4" coil nails provided for ease of installation
  • Lightweight, easy-to-cut material eases installation and helps reduce labor
  • Compression-resistant design creates a stiffer nailing area
  • Requires no baffles, metal connectors, end caps or special filters,
    simplifying the installation process
  • Unique geotextile design to prevent rain, snow and insect infiltration
  • Flexible to conform to roof pitches between 3/12 and 18/12
  • 13.5 square inches net free area (NFA) per linear foot
Application Instructions
QuickVent Application Instructions Data Sheets
QuickVent Nail Data Sheet Brochures
Ventilation Brochure

VENTILATION PRODUCTS BEGIN TO AGE AS SOON AS THEY ARE EXPOSED TO NATURE. BUILDINGS EXPERIENCE AGING FACTORS DIFFERENTLY, SO IT IS DIFFICULT TO PREDICT HOW LONG VENTILATION PRODUCTS WILL LAST. TAMKO PROVIDES A LIMITED WARRANTY, THAT INCLUDES A BINDING ARBITRATION CLAUSE AND OTHER TERMS AND CONDITIONS WHICH ARE INCORPORATED HEREIN BY REFERENCE. YOU MAY OBTAIN A COPY OF THE LIMITED WARRANTY AT TAMKO.COM OR BY CALLING 1-800-641-4691.

Low-Slope/Flat Roofs

Fiberglass Slate Surface Roll Roofing

A choice for low-sloped residential roofs. Applied using TAMKO® Cold-Method and Lap Cement or TAMKO Plastic Roof Cement. Available in a variety of colors to complement existing shingles and building materials. Used as the primary roof covering for low-slope residential applications with minimum slopes of 2" or 12".
Product Details
Product Features
  • Constructed from TAMKO® fiberglass mat
  • Coated on both sides with weathering-grade asphalt
  • Surfaced with mineral granules
SDS
Fiberglass Slate Surface Roll Roofing SDS

Notice: This product is sold "AS IS" and without warranty of any kind, express, implied or statutory, including but not limited to the implied warranties of merchantability and fitness for a particular purpose.